Frequently asked questions

HOW DO I USE YOUR PRODUCT?

Directions of Use:

  1. Shake Well!

  2. Clean and disinfect area.

  3. Apply to wound or area by pushing the sprayer using a quick, firm, complete compression, creating a misting effect.

Note: If pressed slowly sprayer tends to shoot a stream rather than a mist.

4. Dab around area to remove excess run off.

5. DO NOT RUB!

6. Allow 1 to 2 minutes for thin, clear protective film to set.

7. Apply up to 3x a day for 10 days.

8. For best results, rinse nozzle after each use with water to prevent clogging


Alternate application: Spray onto a sterile cotton ball or cotton swab and apply to the skin.

HOW ARE KERICURE PRODUCTS DIFFERENT FROM OTHER LIQUID BANDAGES AND WOUND BARRIER PRODUCTS ON THE MARKET?

Our wound care products are uniquely formulated to create the optimal healing environment. Unlike other wound barrier and liquid bandage products on the market, the KeriCure products provide soothing moisture to the skin while creating a forming a thin, protective film to trap in moisture and block out bacteria. An all-in-one effective, sting and burn free spray that seals minor cuts, scrapes burns, abrasions and skin irritations of ANY SIZE! And best of all, it actually works! Not your average liquid bandage, our products are designed specifically to mimic the natural barrier properties of the skin to help protect minor cuts and scrapes from infection. When applied, the product forms a highly elastic film that can stretch, bend, and be pulled without losing its ability to provide complete coverage.
 

DO YOUR PRODUCTS STING?

The only instances when the product may sting is on blisters or very shallow skin abrasions where exposure to water, or touching it at all, would sting. Our products do not cause a burning or stinging sensation.
 

I CAN’T SEE THE PRODUCT, IS IT WORKING?

Yes! Our product dries completely or almost completely clear. Even though it is not visible on the skin when fully dry, the very thin barrier is still present and will not come off until the wound is fully healed. The high elasticity of the product also helps to ensure that the barrier is not irritating the skin or pulling at it, which can also lead patients to think that it is no longer in place. If ever there is doubt, simply reapply to confirm the barrier is present.
 

ARE YOUR PRODUCTS SAFE FOR CHILDREN?

Yes, our products are safe for any age, even for the most sensitive skin! Some of the common uses for babies and children include: rashes, diaper rash, eczema, newborn scratches, psoriasis, minor cuts, scrapes, insect bites and much more!
 

DO YOUR PRODUCTS CONTAIN GLUTEN?

No, our products are gluten-free.

 

CAN KERICURE PRODUCTS BE USED ON A WOUND IN THE PRESENCE OF BLOOD?

Yes, our products can be used on a bleeding wound.

CAN I GO SWIMMING AND TAKE A SHOWER WITH KERICURE PRODUCTS ON?

Yes, after drying completely (1 to 2 minutes), it is completely waterproof and sweat proof and will not come off until the wound fully heals. We recommend once a day application of the products to help maintain the necessary moisture balance for the wound where needed.

 

WHAT ARE THE INGREDIENTS IN KERICURE PRODUCTS?

The Core Formula for the KeriCure products contain purified water and our proprietary polyacrylate polymer.

In addition, some products contain natural cellulose, vitamin E, and purified silver.

SHOULD WE LAYER THE PRODUCT SEVERAL TIMES?

The product can be layered if necessary. However, one application provides enough material to fully cover most issues effectively.